| Build a Tape |
 |
| Product Number |
|
|
| Manufacturer |
|
|
| Function |
|
|
| Category |
|
|
| Backing |
|
|
| Adhesive |
|
|
| Color |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
ADHESIVE TAPE FEATURES
- Std Roll Length: 10.00 yards
- High quality, durable rubber
- Coated with aggressive, yet clean removal acrylic adhesive
- Uniform mil thickness
- Elongation > 150% (PSTC-31)
ADHESIVE TAPE ADVANTAGES
- Rubber conforms tightly around curves and uneven surfaces
- High-tack
- Clean, one-piece removal
- Hand tearable
- Withstands blasts up to 100 psi
- Prevents small bits of paint media blast and other particles from infiltrating and damaging sensitive surfaces, components and control systems
ADHESIVE TAPE APPLICATIONS
- Offers superior surface protection and seal
- Shot peening
- Plastic Media Blasting (PMB) for removal of paints from aircraft or other surfaces
ADHESIVE TAPE MARKETS SERVED
- Industrial
- Metal fabricating
- Construction
- Automotive
- Aerospace
ADHESIVE TAPE COLORS
|
 |
GENERAL INFORMATION
| BT100 is a high quality, durable rubber, coated with an advanced aggressive, yet removable acrylic adhesive. It is typically used as a shot peening or media blasting masking material. The uniform thickness allows maximum blasts up to 100 psi. The special rubber allows BT100 to conform tightly around curves and uneven surfaces. The high-tack, bonds quickly to clean surfaces with little or no hot gluing. BT100 removes in one piece after exposure to blasting. The white crepe release treated paper liner makes this product easy to tear by hand. It can also be cut with a knife for precise fit. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
Rubber |
|
| Adhesive (unwind) |
Acrylic |
|
| Liner Type (outer) |
Paper (white 4 mil) |
|
| Foam Cell Type |
Closed |
|
| Thickness (total) |
|
41.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
30.00 oz/in |
|
|
| Adhesive Removable |
Yes |
|
|
| Adhesive Clean Removable |
Yes |
|
|
| Adhesive Repositionable |
Yes |
|
|
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
6.00 lbs/in |
|
|
Testing Info: Adhesion to Steel: PSTC-3; Tensile & Elongation: PSTC-31 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
|
|
Adhesive Tape and Foam Converting Services
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|
|