| Build a Tape |
 |
| Product Number |
|
|
| Manufacturer |
|
|
| Function |
|
|
| Category |
|
|
| Backing |
|
|
| Adhesive |
|
|
| Color |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
ADHESIVE TAPE FEATURES
- Static shear: 10,000 minutes to failure when 2.2# are loaded to .25 square inch of product
ADHESIVE TAPE ADVANTAGES
- High tensile strength
- High tack
ADHESIVE TAPE APPLICATIONS
- Suitable for die-cut shapes
- Shielding
- Moisture and vapor barrier
- Sealing components
- Lamination to insulation materials
ADHESIVE TAPE MARKETS SERVED
ADHESIVE TAPE COLORS
|
 |
GENERAL INFORMATION
| FL1000 is a 4.2 mil, single coated foil tape suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials. It has a high tensile strength. High tack acrylic adhesive and a strong bleached 40# densified kraft liner. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
Aluminum |
2.00 |
| Adhesive (unwind) |
Acrylic |
2.20 |
| Liner Type (outer) |
Paper ( 40# kraft) |
|
| Thickness (total) |
|
4.20 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
72.00 oz/in |
|
|
| Adhesion Loop Tack |
136.00 |
|
|
| Adhesive Activation |
Pressure |
|
|
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
50°F |
| Minimum Service Temperature |
0°F |
| Maximum Long-Term Temperature |
350°F |
| Maximum Short-Term Temperature |
400°F |
|
|
Adhesive Tape and Foam Converting Services
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|
|