| Build a Tape |
 |
| Product Number |
|
|
| Manufacturer |
|
|
| Function |
|
|
| Category |
|
|
| Backing |
|
|
| Adhesive |
|
|
| Color |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
ADHESIVE TAPE FEATURES
- Std Roll Length: 36.00 yards
- Dark gray closed-cell acrylic foam carrier
- VHB™ Acrylic Foam Tape
- Peel Adhesion = 25 lb./in of width on stainless
- Static shear holds 1,000 grams/.5 sq. in.10,000 min. at 72°
- Density = 40lb./ cubic ft.
- Volume Resistivity= 2.5 X 10 to the 14th power ohms/cm
- Surface resistivity > 10 to the 16th power
ADHESIVE TAPE ADVANTAGES
- High solvent resistance
- Moisture resistant
- Highly conformable
- UL 746 C
ADHESIVE TAPE APPLICATIONS
- Bonding low surface energy powder coated paints, metals, plastics & a variety of other paint systems
ADHESIVE TAPE MARKETS SERVED
- Industrial
- Automotive
- Aerospace
- Marine
- Truck and Trailer Body
- Construction
ADHESIVE TAPE COLORS
|
 |
GENERAL INFORMATION
| 5952 is a 45 mil VHB (tm); acrylic foam tape with double coated modified acrylic adhesive on both sides. It is a dark gray, very conformable foam that provides strong adhesion to a broad range of substrates. It is used for bonding lower surface energy materials such as powder coated paints and plastics. The foam is conformable to increase contact with surfaces. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
Acrylic Foam |
|
| Adhesive (unwind) |
Acrylic (modified) |
|
| Adhesive (liner) |
Acrylic (modified) |
|
| Liner Type (outer) |
Polyethylene Film (5 mil Red) |
|
| Foam Cell Type |
Closed |
|
| Thickness (total) |
|
45.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 90° Peel |
320.00 oz/in |
|
320.00 oz/in |
| Adhesion Dynamic Shear |
1280 oz/in |
|
1280 oz/in |
| Adhesive Clean Removable |
No |
|
No |
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
120.00 lbs/in |
|
|
Testing Info: Tensile: aluminum T-block 90 degree peel: ASTM D3330; Tensile: ASTM D-897; Dynamic overlap shear ASTM D-1002; Dielectric/mil ASTM D149; Resistivity: ASTM D257 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
| Water Resistant |
Yes |
| UV Resistant |
Yes |
| Solvent Resistant |
Yes |
| Plasticizer Resistant |
Yes |
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
50°F |
| Minimum Service Temperature |
-40°F |
| Maximum Long-Term Temperature |
250°F |
| Maximum Short-Term Temperature |
300°F |
| Dielectric Strength |
455.00 volts |
|
|
Adhesive Tape and Foam Converting Services
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|
|