4688 - Standard Polyethylene Extruded Cloth Tape

tesa tape inc

E-Mail this datasheet

FEATURES

Std Roll Length: 50.00 yards
Glossy surface
Low unwinding force
It meets the demands of the Siemens AG standard TLV 9027/01/06 for nuclear power station: total halogen content < 1000 ppm total sulphur content < 1000 ppm
Total thickness = 0,26 mm
Adhesion to steel = 8,5 N/25mm
Tensile strength = 130 N/25mm

ADVANTAGES

Strong adhesion, even on rough surfaces
Very easy to tear by hand
Waterproof
Ageing-resistant
Stiff but flexible

APPLICATIONS

On-stage/back-stage jobs in theatre, opera, music halls
Bonding of construction films
Closing of cartons, tins, etc.
Fixing of wires
Bundling of cables

MARKETS SERVED

COLORS

Black
Blue
Green
Red
Silver
White
Yellow

GENERAL INFORMATION

tesa 4688 is a standard grade polyethylene extruded cloth tape. It is based on a 55 mesh woven PET/rayon fabric backing coated with a pressure sensitive natural rubber adhesive. tesa 4688 is a typical repairing tape convenient for a variety of needs with very good handling characteristics. Applications: marking, masking, packaging, protecting, fastening, closing ...and a lot more!

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyethylene Coated Cloth
Adhesive (unwind)	Rubber (natural)
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Activation	Pressure
Elongation Percent	9.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.