53327 - General Purpose Fiberglass Reinforced Filament

tesa tape inc

E-Mail this datasheet

FEATURES

ADVANTAGES

Economical
Aggressive high shear

APPLICATIONS

Used for palletizing and unitizing corrugated and paper board boxes
Non-critical bundling applications

MARKETS SERVED

Industrial

COLORS

Clear

GENERAL INFORMATION

NOPI 53327 is a 3.8 mil, low tensile, economical fiberglass reinforced filament tape, with an aggressive high shear resistant adhesive system. It is used for palletizing and untiizing corrugated and paperboard boxes. It is also used for non-critical bundling applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PP - Polypropylene
Adhesive (unwind)	Rubber (synthetic)
Thickness (total)		3.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	60.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	85.00 lbs/in
Elongation Percent	9.00%

SECONDARY PHYSICAL PROPERTIES

Reinforcement

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.