4298 - Non-staining, Ivory Tensilized Polypropylene

tesa tape inc

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Clean removal
Impact resistant
Higher abrasion resistance
High shear resistance
Available on spool rolls

ADVANTAGES

Stain & adhesive transfer resistant
Extra high tack
High adhesion & chemical resistance
Waterproof and non-toxic
Will not delaminate or leave residue
Strong hold
Conformable
Durable impact resistant backing
Surface edge protection during tranportation and installation of marble countertops

APPLICATIONS

L & C clipping of boxes in consumer products
Closing, holding and securing of furniture, office equipment, & appliances
Used in the manufacturing process of hypodermic needles
Surface protection of bumpers
Bandoliering screws, nails and brass clasps for manila envelopes
End tabbing carpet rolls & steel coils
Metal stamping of airplane seats
Cultured marble countertops

MARKETS SERVED

Industrial
Appliance
Furniture
Office equipment
Automotive
Marine
Carpet manufacturing
Metal Mfg

COLORS

Ivory

GENERAL INFORMATION

4298 is a 4.6 mil, medium duty tensilized polypropylene strapping tape with a natural rubber adhesive system. It is a specially designed tape which is stain and adhesive transfer resistant. It features extra high tack, high adhesion and chemical resistance. It is waterproof and non-toxic.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	TPP - Tensilized Polypropylene
Adhesive (unwind)	Rubber
Thickness (total)		4.60

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	61.30 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	162.90 lbs/in
Elongation Percent	32.50%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	160°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.