8410HAF - Heat Activated Film

tesa tape inc

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Heat activated film without a carrier
4354 lbs/sq.in
Best before: 12 months @ < 77°F, 15 months @ < 59°F, 18 months @ < 41°F

ADHESIVE TAPE ADVANTAGES

Once activated it has the highest bonding strength
Dimensionally stable
Good heat and chemical resistance
Extended shelf life versus typical heat activated films

ADHESIVE TAPE APPLICATIONS

High strength bonding, principally of heat and compression resistant materials such as metals, plastics, woven materials, ceramics and friction linings
Continuous bonding of cardboard, glass fibre, foils and plastic parts
Bonding of plain bearings
Particularly suitable for work pieces with smooth surfaces requiring permanent bonding

ADHESIVE TAPE MARKETS SERVED

Industrial

ADHESIVE TAPE COLORS

GENERAL INFORMATION

tesa HAF 8410 is a 2.4 mil, heat activated film without a carrier. It is used for high strength, permanent bonding. It has good heat and chemical resistance.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Rubber (nitrile/phenolic)	2.40
Liner Type (outer)	Paper
Thickness (total)		2.40

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Activation	Heat

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	100°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.