4657 - Temperature Resistant Surface Coated Cloth Tape

tesa tape inc

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Heat resistant masking during the production of vehicles and machines (for screw tap holes, flange surfaces and drainage boreholes) Multiple stage oven drying is also possible
Partial masking during treatment with impregnating agents (base corners remain as bare metal)
Partial masking electrostatic powder coating

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

Resistance to high temperatures. Values obtained in practice: up to 212°:F= constant resistance, up to 320°:F =two hours 350°:F and over = 0.5 hours
Removal of the tape without any residue (it is advisable to remove while warm)
Highly resistant to aging
High resistance to paint solvents
Varnishing & Electroplating
protecting printed circuit boards
Protection of multiple contact strips and riveted connectors

ADHESIVE TAPE MARKETS SERVED

Automotive
Truck & Trailer body
Trains
Electronics
Farm/Lawn Equipment
RV
Buses

ADHESIVE TAPE COLORS

GENERAL INFORMATION

4657 is an 11.5 mil, plastic coated cloth used in vehicle high temperature paint masking, whenever high stress such as paint solvents, easy removal after high temperatures and conformability is needed. Not suitable for brush washing processes with dichlorodifluoromethane or Freon 12.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Vinyl Coated Cloth	11.50
Adhesive (unwind)	Rubber (thermosetting)
Thickness (total)		11.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	50.00 lbs/in
Elongation Percent	7.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Solvent Resistant	Yes
Plasticizer Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	350°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.