50530 - High Performance Polyolefin Adhesive Film

tesa tape inc

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

tesa 50530, also known as "Bodyguard"
Opaque white
Ideal for protecting delicate surfaces exposed to the environment, such as freshly painted cars
Temperature resistance = 6 months in Florida

ADHESIVE TAPE ADVANTAGES

UV stable polyolefin adhesive film

ADHESIVE TAPE APPLICATIONS

Surface protection during transit for freshly painted surfaces in the automotive industry

ADHESIVE TAPE MARKETS SERVED

Automotive

ADHESIVE TAPE COLORS

White

GENERAL INFORMATION

50530 is a 3.1 mil, polyolefin film tape used for surface protection in the automotive industry. tesa 50530, also known as "Bodyguard", is a UV stable, white polyolefin adhesive film, ideal for protecting delicate surfaces exposed to the environment, such as freshly painted cars.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyolefin	3.10
Adhesive (unwind)	Elastomer (synthetic)
Thickness (total)		3.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	9.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	16.00 lbs/in
Elongation Percent	30.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.