52325 PV3 - Double Coated Flexographic Mounting Tape

tesa tape inc

E-Mail this datasheet

FEATURES

ADVANTAGES

High adhesive value
Good shear resistance
No plate movement or edge lift problems, even at high speeds and on extended print runs
Improved unwind characteristics of the structured PP liner ensure that easy handling and mounting is guaranteed
PP liner prevents the formation of air bubbles
Plates are easily repositioned during mounting as the full adhesion of the tape only becomes effective during the print run

APPLICATIONS

Mounting of photopolymer plates in flexographic printing

MARKETS SERVED

Commercial printing

COLORS

Pink

GENERAL INFORMATION

52325 PV3 is a 4.6 mil, double coated, UPVC that is used to mount photopolymer flexographic plates for printing. High adhesive value & good shear resistance ensures no plate movement or edge lift problems, even at high speeds and on extended print runs. Improved unwind characteristics of the structured PP liner ensure that easy handling and mounting is guaranteed. It also prevents the formation of air bubbles. Plates are easily repositioned during mounting as the full adhesion of the tape only becomes effective during the print run.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	UPVC - Unplasticized Polyvinylchloride	10.00
Adhesive (unwind)	Rubber
Adhesive (liner)	Rubber
Liner Type (outer)	Polypropylene (structured, white)
Liner Type (inner)	Polypropylene (structured, white)
Thickness (total)		10.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	65.00 oz/in	65.00 oz/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.