585 - Gaffer's Tape

Covalence/Tyco

E-Mail this datasheet

FEATURES

Adhesion to backing=30oz/in

ADVANTAGES

High adhesion for good hold
Virtually no residue even on difficult jobs
Matte finish for low light reflection
Variety of bright colors with matte surface
High cloth thread count for clean/straight tear

APPLICATIONS

Gaffer's tape
Wire hold-down
Marking stages
Color coding
Marking film canisters
Bookbinding
Bus seat repair

MARKETS SERVED

Automotive
Paper products
Photography

COLORS

Black
Blue
Brown
Gray
Green
Olive drab
Red
White
Yellow

GENERAL INFORMATION

585 is a 11.5mil, vinyl-coated tape, primarily used for wire hold-down, color coding, marking film canisters, bookbinding, and bus seat repair. Waterproof, low gloss, non-reflective cloth backing. High adhesion product for good hold.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Vinyl Coated Cloth	11.50
Adhesive (unwind)	Rubber
Thickness (total)		11.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	75.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	40.00 lbs/in
Testing Info: Adhesion to backing, Adhesion to steel=PSTC-1; Tensile, Thickness=ASTM D-1000

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.