888 - Polyethylene Stucco Tape

Covalence/Tyco

E-Mail this datasheet

FEATURES

Adhesion to backing=40oz/in
Unwind force=45oz/in

ADVANTAGES

Specially designed backing virtually eliminates residue at tape removal after extended exposure
High quality adhesive holds even on rough surfaces
Easy unwind
Conformable
Good tear

APPLICATIONS

For stucco masking
Outdoor exposure applications
Sunlight (UV) exposure applications
Plaster masking
Extended exposure where cloth reinforcement is needed

MARKETS SERVED

Construction

COLORS

GENERAL INFORMATION

***DISCONTINUED BY COVALENCE, REPLACEMENT IS 827*** 888 is a 10.5mil, polyethylene coated cloth tape with a UV blocking layer, primarily used for stucco masking applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyethylene Coated Cloth	10.50
Adhesive (unwind)	Rubber (natural)
Thickness (total)		10.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	60.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	36.00 lbs/in
Testing Info: Adhesion to backing, Adhesion to steel=PSTC-1; Tensile=ASTM D-1000

SECONDARY PHYSICAL PROPERTIES

UV Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.