3308-1 - Single Coated Black Polyethylene Foam Tape

Stik-ll Products

E-Mail this datasheet

FEATURES

Std Roll Length: 18.00 yards
Static Shear - minimum requirement 2psi for 100+ hours
Probe tack average 800 grams
2# density polyethylene foam
Available in white foam as product #3008-1

ADVANTAGES

Aggressive, high tack adhesive
Bonds to many different substrates
Resistance to temperature extremes
Resistance to plasticizers
Excellent long term aging characteristics

APPLICATIONS

Point of purchase displays and die cuts
Appliances
Wire raceways
Wire mounts
Shower & tub enclosures
Computers
Signage
Metal Stampings
Plastic Extrusions
Furniture
Window glazing
Mirrors
Window Trim
Motor home & yachts
Molded plastic

MARKETS SERVED

Industrial
Specialty gifts
Trophy
Arts & entertainment
Appliance
Automotive
Aerospace
Marine
Truck and trailer body

COLORS

Black

GENERAL INFORMATION

3308-1 is a 1/8in single coated 2# density, black, polyethylene foam. It uses a synthetic acrylic based adhesive, which is unsurpassed on irregular surfaces and provides superior performance in automotive applications requiring resistance to temperature extremes, plasticizers and where long term aging characteristics are important.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene
Adhesive (unwind)	Acrylic
Liner Type (outer)	Paper (60# silicone)
Foam Cell Type	Open
Thickness (total)		125.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	75.00 oz/in
Adhesion Dynamic Shear	20 oz/in
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Testing Info: Adhesion: PSTC-3; Static shear: PSTC-7; Probe tack: ASTM D-2979

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Plasticizer Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	-20°F
Maximum Short-Term Temperature	180°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.