1008-1 - Single Coated White Polyethylene Foam

Stik-ll Products

E-Mail this datasheet

FEATURES

Std Roll Length: 18.00 yards
Standard liner is 60# white silicone-coated paper
Static Shear - minimum requirement 3psi for 100+ hours
Probe tack average 800
2# density polyethylene foam
Available in black foam as product #1308-1

ADVANTAGES

Aggressive, high tack adhesive
Bonds to many different substrates

APPLICATIONS

Point of purchase displays and die cuts
Appliances
Wire raceways
Wire mounts
Shower & tub enclosures
Computers
Signage
Metal Stampings
Plastic Extrusions
Furniture
Window glazing
Mirrors
Window Trim
Motor home & yachts
Molded plastic

MARKETS SERVED

Industrial
Specialty gifts
Trophy
Arts & entertainment
Appliance
Automotive
Aerospace
Marine
Truck and trailer body

COLORS

White

GENERAL INFORMATION

1008-1 is a 1/8in single coated 2# density, white, polyethylene foam. It uses a synthetic rubber based adhesive, which provides superior performance in applications requiring an aggressive, high tack, high shear pressure sensitive tape.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene
Adhesive (unwind)	Rubber
Liner Type (outer)	Paper (60# silicone)
Foam Cell Type	Closed
Thickness (total)		125.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	95.00 oz/in
Adhesion Dynamic Shear	20 oz/in
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.