P665 - General Purpose Vinyl Coated Cloth

Shurtape Technologies Inc

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Available in 6 colors
Combines economy & performance
Matte finish
Superior adhesion, yet removes cleanly
Easy unwind
Hand tearable

ADVANTAGES

Matte surface backing & positive-seal adhesive combine for a full-value all purpose tape
Provides positive dust & dirt resistance

APPLICATIONS

Film can sealing
Gaffer's tape
Storage shelf marking
General sealing, holding and identification
Aircraft parts surface protection
Book binding
Surface protection for metalworking

MARKETS SERVED

Arts/Entertainment
Industrial
Metalworking
Aerospace
Commercial printing
Tank manufacturers

COLORS

Black
Blue
Gray
Red
White
Yellow

GENERAL INFORMATION

P665 is a 11.5 mil, vinyl coated, cloth tape. It is primarily used for identifying, film can sealing, splicing, holding and decorative applications. P665 may be used as an inexpensive alternative to gaffer's tape in the entertainment industry.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Vinyl Coated Cloth
Adhesive (unwind)	Rubber (synthetic)
Thickness (total)		11.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	80.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	48.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.