PS748 - Strapping Tape

Shurtape Technologies Inc

E-Mail this datasheet

FEATURES

Resists moisture and solvents
Excellent abrasion resistance
Specifically formulated, high memory film designed to contract when applied under firm manual tension

ADVANTAGES

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

PS748 is a 2.8 mil, utility grade, tensilized, strapping tape. It is used in palletizing, banding, bundling, reinforcing and light duty strapping.

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	34.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	85.00 lbs/in
Elongation Percent	35.00%
Testing Info: Physical characteristics are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape.

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	55°F
Minimum Service Temperature	55°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.