HP300 - Film Packaging Tape

Shurtape Technologies Inc

E-Mail this datasheet

FEATURES

Backing is 35 micron biaxially oriented, cast polypropylene film
Adhesive is high shear hot melt adhesive
Holding power to fiberboard = 7000+ minutes

ADVANTAGES

Extra high quick stick, bonding strength and holding power on corrugated cartons
Tough, aggressive and consistent case sealing performance
Adheres well to corrugated cartons, paper, film, and a variety of other substrates

APPLICATIONS

Ideal for manual or automatic case sealing applications
Recommended for critical closure of medium weight cartons subjected to handling stress
Packaging, bundling, repairing cartons and paper and film bags

MARKETS SERVED

Packaging
Industrial

COLORS

Clear
Tan

GENERAL INFORMATION

HP300 is a 2.2 mil, performance grade, hot melt biaxially oriented polypropylene film packaging tape. It is used for sealing, packaging of medium weight cartons and bundling.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	BOPP - Biaxially Oriented Polypropylene
Adhesive (unwind)	Rubber (hot melt)
Thickness (total)		2.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	42.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	30.00 lbs/in
Elongation Percent	135.00%
Testing Info: Physical characteristics are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape.

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.