SF683 - Cloth/Duct Tape

Shurtape Technologies Inc

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Waterproof backing
Provides air-tight, moisture proof seal
Extremely flexible and conformable
Excellent tack
Higher adhesion than most foil tapes
Easy unwind
Hand tearable
No release liner to discard
Tape color/appearance designed to match sheet metal and flex duct and duct board, available in printed metalized silver

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

Designed especially for use in the HVAC industry to seam, connect, splice, patch and seal sheet metal and flex duct, insulation, rigid duct boards, air vents and fiber board

ADHESIVE TAPE MARKETS SERVED

Industrial
HVAC

ADHESIVE TAPE COLORS

GENERAL INFORMATION

SF683 is a 11.0 mil, contractor grade, shurflex metalized, printed, cloth/duct tape. It is used for HVAC industry to seam, connect, splice, patch and seal sheet metal and flex duct, insulation, rigid duct boards, air vents and fiber board.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyethylene Coated Cloth
Adhesive (unwind)	Rubber
Thickness (total)		11.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	27.00 lbs/in
Elongation Percent	10.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	55°F
Minimum Service Temperature	55°F
Maximum Short-Term Temperature	200°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.