|
|
ADHESIVE TAPE FEATURES
- Available in Metalized silver
- Waterproof backing
- Provides moisture-free, air tight seal
- More flexible and conformable and higher adhesion than most foil tapes
- Easy to unwind and apply
- Hand-tearable
- No release liner to discard
- Tape color/appearance designed to match sheet metal and flex duct and duct board
ADHESIVE TAPE ADVANTAGES
ADHESIVE TAPE APPLICATIONS
- HVAC industry to seam, connect, splice, patch and seal sheet metal and flex duct, rigid duct boards, air vents, insulation, fibrous filter banks and pollution collection systems
- Waterproof packaging
- Protective holding and seaming industrial uses requiring a product with the characteristics and benefits of this tape
ADHESIVE TAPE MARKETS SERVED
ADHESIVE TAPE COLORS
|
 |
GENERAL INFORMATION
| SF682 is a 11.0 mil, contractor grade, shurflex metalized, cloth/duct tape. It is used for HVAC to seam, connect, splice, patch and seal sheet metal and flex duct, boards, air vents, and insulation. It is also used in waterproof packaging, protective holding and seaming industrial uses. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
Polyethylene Coated Cloth |
|
| Adhesive (unwind) |
Rubber |
|
| Thickness (total) |
|
11.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
50.00 oz/in |
|
|
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
27.00 lbs/in |
|
|
| Elongation Percent |
10.00% |
|
|
|
|
| SECONDARY PHYSICAL
PROPERTIES |
| Water Resistant |
Yes |
| Hand Tearable |
Yes |
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
55°F |
| Minimum Service Temperature |
55°F |
| Maximum Short-Term Temperature |
200°F |
|
|
Adhesive Tape and Foam Converting Services
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|