S5300A - Solid Acrylic Tape

Scapa Tapes North America

E-Mail this datasheet

FEATURES

The tape possesses a uniform high-tack acrylic adhesive on both surfaces
Elongation = 500% (ASTM D412 Die C
Cleavage peel strength (ASTM D1062 = 30 pli
Dynamic shear strength (ASTM D3163 = 90 psi
Density = 65 lbs/cu. ft.
Aging Properties: Break away peel on aluminum = 29 psi (24 hour); 42 psi (3 yr. Florida aging); 50 psi (# year Arizona aging)
Continuous peel = 8 psi (24 hr.); 21 psi (3 yr. Florida aging); 22 psi (3 yr. Arizona aging)
Break away peel on primer: 18 psi (24 hr.); 37 psi (3 yr. Florida aging); 41 psi (3 yr. Arizona aging)
Continuous peel on primer: 7 psi (24 hr); 19 psi (3 yr. Florida aging); 19 psi (3 yr. Arizona aging)

ADVANTAGES

APPLICATIONS

The tape possesses a uniform high tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates
The tape is formulated to withstand a wide range of weathering and temperature conditions without losing adhesion

MARKETS SERVED

Industrial

COLORS

GENERAL INFORMATION

Duofoam® S5300A is a 25 mil, solid acrylic tape. It is primarily used for a wide range of weathering and temperature conditions without losing adhesion.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic
Liner Type (outer)	(H.D. white polyethylene; 7.0 mil)
Thickness (total)		25.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	240.00 oz/in	240.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	200.00 lbs/in
Testing Info: Initial peel adhesion (ASTM D3330)

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	-20°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.