149 - Low Residue Duct Tape

Scapa Tapes North America

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Leaves no residue upon removal
Easily torn by hand and will not twist or curl during application
Backing adhesion (PSTC 1 mod.) 20 min. @ RT = 25 oz/in

ADVANTAGES

APPLICATIONS

Taping of metal ductwork
Applications requiring a conformable product and low residue performance

MARKETS SERVED

HVAC
Industrial

COLORS

Black

GENERAL INFORMATION

149 is a 9.5 mil, low residue duct tape. It is primarily used for taping of metal ductwork and applications requiring a conformable product and low residue performance

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyethylene Coated Cloth	4.75
Adhesive (unwind)	Rubber (natural)	4.75
Thickness (total)		9.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	30.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Testing Info: Initial peel adhesion (ASTM D-1000)

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	32°F
Maximum Short-Term Temperature	140°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.