6500 - Specialty Unsupported Adhesive Transfer

Scapa Tapes North America

E-Mail this datasheet

FEATURES

Develops high initial "wet out" and superior anchorage to ether and ester foams, even under demanding conditions
Excellent peel, tack, and quick stick
Good chemical, plasticizer, and heat resistance
Adheres to a wide variety of surfaces including urethane foams, metals, and engineered plastics
Good long term aging and the ability to withstand environmental extremes
Holding power (PSTC 7 Mod./178°) 4.4 psi (/2"x1"x1000g) @ RT = 6 hours

ADVANTAGES

APPLICATIONS

Sound attenuation and vibration dampening
Automotive decorative trim and carpeting

MARKETS SERVED

Automotive
Industrial
Gasketing

COLORS

GENERAL INFORMATION

Ultrafilm™ 6500 is a 5.0 mil, specialty unsupported adhesive transfer. It is primarily used for sound attentuation, vibration dampening, automotive decorative trim and carpeting.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	5.00
Liner Type (outer)	Plastic (4.0 mil, white)
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	158.00 oz/in	158.00 oz/in
Adhesive Activation	Pressure
Testing Info: Initial peel adhesion to stainless steel (PSTC 1 Mod./180°) 20 min. @ RT; Holding power (PSTC 7 Mod./178°) 4.4 psi (1/2"x1"x1000g) @ RT

SECONDARY PHYSICAL PROPERTIES

Chemical Resistant	Yes
Plasticizer Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	-40°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.