U477 - Electrically Conductive Adhesive Transfer

Scapa Tapes North America

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Very high tack
High shear strength
Good chemical resistance
Adheres well to a variety of surfaces including metals, painted surfaces, and many plastic films
Holding power (PSTC 7 Mod./178°) 4.4 psi (1/2"x1"x1000g) @ RT > 24 hours
ASTM D-149; dielectric strength = 2308 v/mil
ASTM D-149 breakdown voltage = 4616 volts
ASTM D-150 dielectric constant (60Hz@RT) = 3.34
ASTM D-257 volume resistivity (ohm-cm) = 9.27 x 1015

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

Unifilm® U477 is a 2 mil, electrically conductive adhesive transfer. It is primarily used in EMI/RFI shielding.

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in	40.00 oz/in
Adhesive Activation	Pressure
Testing Info: Initial peel adhesion to stainless steel (PSTC 1 Mod./180°) 20 min. @ RT; Holding power (PSTC 7 Mod./178°) 4.4 psi (1/2"x1"x1000g) @ RT

SECONDARY PHYSICAL PROPERTIES

Chemical Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	65°F
Minimum Service Temperature	-40°F
Maximum Short-Term Temperature	250°F
Dielectric Strength	2308.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.