M793/1 MIL - Polyester Film Tape

Saint-Gobain

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 72.00 yards
Withstands high temperature (>350°F)
Clean removable
Non-silicone adhesive eliminates silicone contamination
Easy unwind
High strength
High temperature rubber adhesive
Tack = 250 g/cm squared

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

High temperature paint masking
Powder coating
Flash masking
Composite bonding

ADHESIVE TAPE MARKETS SERVED

Painting
Composite bonding
Industrial

ADHESIVE TAPE COLORS

GENERAL INFORMATION

M793/1 Mil is a 1 mil polyester film (2 mil total) with a high temperature rubber adhesive. It is an experimental high temperature masking tape that does not contain any silicones. Primary applications include high temperature paint masking, powder coating, flash masking and composite bonding. M793/1 Mil is designed to be a low tack, removable non-silicone masking tape which will withstand consecutive baking cycles in excess of 350°F

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Rubber	1.00
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	10.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	350°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.