M765 - Polyester Film Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
Excellent flagging resistance
Good conformability
Solvent & oil resistant
Clean cutting with no adhesive separation
Adhesive can be thermoset to increase adhesion & solvent resistance
Flame retardant
Printable

ADVANTAGES

APPLICATIONS

Hold, insulate & protect various materials
Printable capacitor tape

MARKETS SERVED

Electronics
Industrial

COLORS

White

GENERAL INFORMATION

M765 is a 2.5 mil, electrical grade, polyester film with specially compounded acrylic adhesive. It is designed to be a flame retardant, printable capacitor tape. A unique treatment on the film causes the tape to form a firm char rather than allow the polyester and adhesive to melt and drip when exposed to a flame. M765 does not burn readily and thereby protects the capacitor.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Acrylic	1.50
Thickness (total)		2.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	30.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	-20°F
Maximum Short-Term Temperature	325°F
Flame Resistant	Yes
Insulation Class	130.00°C
Direct Electrolytic Corrosion Factor	5000.00 Factor

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.