M797 - 3 mil Mustard Polyester Film Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
No release coating on tape that would cause cured conformal coating to flake off upon removal

ADVANTAGES

Silicone free, no silicone shadow upon tape removal
Polyester backing resists damage from sharp edges
Backing offers low cost, effective, high temperature masking tape

APPLICATIONS

Conformal coating operation

MARKETS SERVED

Conformal coating
Painting
Industrial

COLORS

GENERAL INFORMATION

M797 is a 3 mil, polyester film tape with a mustard color rubber resin, pressure sensitive adhesive. The polyester film offers an economical method to hold, insulate or protect materials. The rubber adhesive has been specially formulated to resist the high temperatures of the conformal coating operation.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Rubber	2.00
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	20.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	325°F
Insulation Class	130.00°C
Dielectric Strength	5000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.