M751 - Polyester Film Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
Excellent quick stick & wet out capabilities
Polyester backing resists damage from sharp edges
Backing offers low cost, effective, holding, for materials
Easy to apply electrical insulation
Flying splice applications

ADVANTAGES

APPLICATIONS

To hold, insulate & protect materials
General purpose splicing tape
Used by label, decal & pressure sensitive materials manufacturers

MARKETS SERVED

Electrical
Electronics
Industrial
Commercial printing

COLORS

Yellow

GENERAL INFORMATION

M751 is a 3 mil, polyester film with yellow silicone pressure sensitive adhesive. It offers an economical method to hold, insulate and protect materials. M751 is a general purpose polyester splicing tape. It features a conformable adhesive designed for superior bondning to a wide variety of treated papers, films and foils.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Silicone	2.00
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	28.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-50°F
Maximum Short-Term Temperature	350°F
Insulation Class	130.00°C
Dielectric Strength	5000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.