K104 - Polyimide Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
High temperature resistance
Excellent mechanical & electrical properties
Excellent dielectric strength
High conformability
Resistant to solvents
Outstanding resistance to cut through, impact & abrasion resistant
Burning of adhesive forms a non conductive ash

ADVANTAGES

APPLICATIONS

Fills the need of electrical insulation requirements

MARKETS SERVED

Electrical
Electronics
Industrial

COLORS

Amber

GENERAL INFORMATION

K104 is a 1.5 mil, polyimide backing material with a clear silicone, pressure sensitive adhesive on one side. It was constructed to fill the requirements of a high performance thermosplastic polyimide backing materials.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyimide	0.50
Adhesive (unwind)	Silicone	1.00
Thickness (total)		1.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	12.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	25.00%

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Solvent Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	500°F
Insulation Class	180.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	4000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.