2265-5 - High Modulus Extruded PTFE Tape

Saint-Gobain

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 36.00 yards
Chemical resistant
Lays flat
Anti-friction

ADHESIVE TAPE ADVANTAGES

High temperature clean release

ADHESIVE TAPE APPLICATIONS

Composite layup
Roller wrapping
Plate masking
Uses where costly clean up is a problem

ADHESIVE TAPE MARKETS SERVED

Plastics
Industrial
Commercial Printing

ADHESIVE TAPE COLORS

Gray

GENERAL INFORMATION

2265-5 is a 6.5 mil, high modulus extruded PTFE film coated with a high temperature, pressure sensitive silicone adhesive. It has excellent conformability and release properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Hi Modulous	5.00
Adhesive (unwind)	Silicone	1.50
Thickness (total)		6.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	35.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	80.00 lbs/in
Elongation Percent	175.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Chemical Resistant	Yes
Plasticizer Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	500°F
Dielectric Strength	15000.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.