2285-5 - High Modulous PTFE Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
High-temperature resistant
Extremely durable
Abrasion resistant
Long wearing
Easy to apply
Will not curl or wrinkle

ADVANTAGES

Ideal for use as a release surface which results in less equipment down time

APPLICATIONS

Protecting extrusion & laminating equipment during plastic extrusion coating process
Roller wrapping tape to protect exposed ends of neoprene roller from molten plastic

MARKETS SERVED

Plastics
Paper
Commercial Printing
Industrial

COLORS

Orange

GENERAL INFORMATION

2285-5 is a 6.5 mil, high modulous PTFE tape. It is a specially formulated PTFE film coated with a high temperature, pressure sensitve silicone adhesive. 2285-5 is the ideal tape for protecting extrusion and laminating equipment during the plastic extrusion coating process.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Hi Modulous	5.00
Adhesive (unwind)	Silicone	1.50
Thickness (total)		6.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	80.00 lbs/in
Elongation Percent	200.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Plasticizer Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	500°F
Dielectric Strength	15000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.