M741 - Polyester Splicing Tape

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
Resists damage from sharp edges
Quick stick for flying splice
Excellent wet out capabilities
Easy to apply electrical insulation

ADVANTAGES

APPLICATIONS

Splicing treated papers, films, and foils
Electrical insulation
Flying splice

MARKETS SERVED

Specialty Industrial
Paper products
Commercial printing
Film
Foils

COLORS

Blue

GENERAL INFORMATION

M741 is a 3 mil polyester tape with 1 mil of polyester film and 2 mil pressure sensitive silicone adhesive. M741 is primarily used in all purpose splicing applications and offers quick stick for flying splice applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Silicone	2.00
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	30.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	350°F
Dielectric Strength	5000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.