HM650 - High Modulous PTFE Film

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Excellent high temperature resistance
Chemically inert
Weather resistant
Conformable
Stable & non-toxic

ADVANTAGES

Offers low coefficient of friction

APPLICATIONS

Used as masking during metal bonding
Roll covering on plastic extruders
Fine wire harnesses

MARKETS SERVED

Industrial
Electrical
Aerospace
Commercial printing

COLORS

White

GENERAL INFORMATION

HM650 is a 6.5 mil, high modulous PTFE film. The film has been subjected to a special process that lowers its elongation and increases its breaking strength for easier handling. HM650 is often used as masking during metal bonding, roll covering on plastic extruders and for fine wire harnesses.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Hi Modulous	5.00
Adhesive (unwind)	Silicone	1.50
Thickness (total)		6.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	25.00 oz/in
Adhesive Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	45.00 lbs/in
Elongation Percent	200.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Plasticizer Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	500°F
Insulation Class	180.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	13500.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.