V828 - Single Coated, Closed Cell PVC

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 16.66 yards
Available in black
Paper liner
Flexible backing
Dimensionally stable
Tensile Strength : 13.7 PSI
Density : 6lbs./cu. ft.
Thermal Conductivity= .27
Meets UL 94 HBF

ADVANTAGES

Excellent for all climates; withstands wide temperature range
Excellent conformability and adapts to irregular surfaces
Low deflection force causes no distortion of thin gauge plastics and metals
Aggressive adhesive allow for easy installation
Dimensionable stable under compression. Will not ooze, drip or shift

APPLICATIONS

Light and dust seals
Suspended ceilings
Refrigeration
Wall systems
Industrial/Electronic equipment cabinets
Toolbox lid seal

MARKETS SERVED

Contruction
Commercial refrigeration
Automotive
Appliance
HVAC

COLORS

Black

GENERAL INFORMATION

V828 is a 1/4" thick , closed cell Polyvinylcloride (PVC), with an acrylic adhesive system on one side. Primarily used for light, air, and moisture seals in a variety of applications. Norseal® 820 series.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride	250.00
Adhesive (unwind)	Acrylic (water based)
Liner Type (outer)	Paper
Foam Cell Type	Closed
Thickness (total)		250.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion Static Shear	64 oz/in
Adhesive Activation	Pressure
Elongation Percent	125.00%
Testing Info: Peel adhesion: PSTC-2 Tensile & Elongation%: ASTM D-412 Force to compress & Deflection%: ASTM D-1667, Compression set%: NTP-37, Thermal conductivity: ASTM C-518

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Water Absorption Percent	5%
Density	Low
Force-To-Compress	1.70
Compression Deflection %	0%
Compression Percent	4%
Hardness ShoreOO	10

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	-15°F
Maximum Long-Term Temperature	180°F
Maximum Short-Term Temperature	180°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.