V762 - Closed Cell Polyvinyl Chloride Foam Sealant

Saint-Gobain

E-Mail this datasheet

FEATURES

Std Roll Length: 33.00 yards
Firm, high density foam
Superb cellular structure permits a minimum 30% compression to produce a positive seal in mechanically fastened assemblies
Excellent oxidation, weather, & fungi resistance
Low water absorption enhances long sealing life
Density=15#/cul ft.
Tensile strength=55PSI

ADVANTAGES

Ideal for diecuts
A multitude of tiny cells act like shock absorbers to seal and dampen vibration
High internal strength provides good abrasion resistance
Aggressive pressure sensitive adhesive facilitates high speed application
Easy-peel liner eliminates foam stretching during installation

APPLICATIONS

Truck trailer joint seals
Door frame assemblies
Concrete Forms
Export container seals
Diecut gaskets
Roof sealing for parapets
Duct seals
Appliance seals
Truck cab overlap seals

MARKETS SERVED

Transportation
HVAC systems

COLORS

Gray

GENERAL INFORMATION

V762 is a 1/16" thick, high density PVC foam. It is ideal for diecutting, vibration dampening and metal to metal sealing. Its high internal strength provides good abrasion resistance. Norseal® V760 series.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride
Adhesive (unwind)	Acrylic (water based)
Liner Type (outer)	Paper
Foam Cell Type	Closed
Thickness (total)		62.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	10.00 oz/in
Adhesive Activation	Pressure
Elongation Percent	140.00%
Testing Info: Peel adhesion: PSTC-2, Elongation & Tensile: ASTM D-412 die A, Force to compress & Deflection%: ASTM D-1667, Compression set: NTP-37, Water absorption: NTP-35, Hardness : ASTM D-2240

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Plasticizer Resistant	No
Water Absorption Percent	3%
Density	High
Force-To-Compress	7.20
Compression Deflection %	3%
Compression Percent	4%
Hardness ShoreOO	45

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	-15°F
Maximum Short-Term Temperature	160°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.