HM225 - High Modulous PTFE Tape

Saint-Gobain

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 36.00 yards
High temperature resistance
Chemically inert
Weather resistant
Stable & non-toxic
Offers low coefficient of friction
Thin & conformable

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

Used as masking during metal bonding
Roll covering on plastic extruders
Fine wire harnesses

ADHESIVE TAPE MARKETS SERVED

Industrial
Electrical
Aerospace
Commercial printing

ADHESIVE TAPE COLORS

GENERAL INFORMATION

HM225 is a 2.3 mil, high modulous Teflon™ film with silicone adhesive. It has longer elongation and increased break strength for easier handling. HM225 is often used as masking during metal bonding, roll covering on plastic extruders, and/or fine wire harnesses.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Hi Modulous	1.30
Adhesive (unwind)	Silicone	1.00
Thickness (total)		2.30

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	18.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	13.00 lbs/in
Elongation Percent	125.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	500°F
Insulation Class	180.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	6000.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.