M758 - 2.5 Mil Polyester Film Tape

Saint-Gobain

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 72.00 yards
Excellent high/low temperature resistance
Resists damage from sharp edges
Offers low cost, effective holding for materials
Easy to apply electrical insulation
Substitutes for old CR515 product

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

Electrical insulation
Used to hold, insulate and/or protect materials

ADHESIVE TAPE MARKETS SERVED

Electrical
Industrial

ADHESIVE TAPE COLORS

Black

GENERAL INFORMATION

M758 is a 2.5 mil, polyester film with black silicone adhesive. It offers an economical method to hold, insulate and/or protect materials. The silicone adhesive system offers excellent high/low temperature resistance.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	1.00
Adhesive (unwind)	Silicone	1.50
Thickness (total)		2.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	25.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	20°F
Minimum Service Temperature	-100°F
Maximum Short-Term Temperature	350°F
Insulation Class	130.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	5500.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.