P2401 - Oil-Filled Transformer Filament Tape

Permacel/Nitto Denko

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Effectively combines high tensile & tear strengths
Passes power factor testing
Excellent adhesion to all insulation materials used in construction of an oil-filled transformer
Oil combatable adhesive
Dielectric strength = 5,000 volts

ADHESIVE TAPE ADVANTAGES

Exceptional compatability to a wide range of transformer oils, especially when fully thermoset

ADHESIVE TAPE APPLICATIONS

Wide range of heavy-duty banding, bundling & reinforcing applications
Holding functions in the manufacture of medium- and large-size dry type transformers

ADHESIVE TAPE MARKETS SERVED

Transformers
Industrial

ADHESIVE TAPE COLORS

Clear

GENERAL INFORMATION

***DISCONTINUED** P2401 is a 6.5 mil, polyester film/glass filament oil-filled transformer tape. It is ideally suited for a variety of holding functions in the manufacture of medium & large-size dry type transformers. P2401 is expressly engineered as a construction tape for use in the manufacture of oil-filled distribution and power fransformers.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic (thermosetting)
Thickness (total)		6.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	275.00 lbs/in
Elongation Percent	5.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.