P166 - Special-Use Reinforced Strapping Tape

Permacel/Nitto Denko

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 60.00 yards
High tensile
Superior adhesion to many surfaces
Non-staining
Easy removal
Non-splitting
Mono-filament glass reinforced
Unwind @150 ft/min = 20 oz/in.
Impact strength=85in-lbs.

ADHESIVE TAPE ADVANTAGES

Waterproof
Adheres to wax-coated boxboard
Higher impact resistance than most strapping tapes

ADHESIVE TAPE APPLICATIONS

Heavy-duty palletizing
Metal roll tabbing
Closing & reinforcing wax-coated boxboard
Carton sealing & bundling
Temporary hold on metal parts

ADHESIVE TAPE MARKETS SERVED

Metalworking
Industrial
Packaging
Construction

ADHESIVE TAPE COLORS

Natural

GENERAL INFORMATION

P166 is a 9.5 mil, mono-filament glass reinforced, polyester strapping tape. It is expressly designed for wax-coated boxboard, metal surfaces, equipment parts and furniture holding.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Rubber (natural)
Thickness (total)		9.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	64.50 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	347.00 lbs/in
Elongation Percent	6.50%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Reinforcement	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.