3633 - Surface Protection Tape

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Provides maximum holding power
Air bubble-free
Uniform thickness eliminates irregular shading of protected surface
Splice-free
Economical
Removes cleanly from a variety of surfaces
Adhesion levels: bright annealed stainless = 5.4 oz./in.; #4 grit finish stainless = 1.4 oz./in.; mill finish #430 stainless = 3 oz./in.; aluminum = 6.5 oz./in.; metalized polyester = 9.5 oz./in.

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

Protects printed, coated, laminated surfaces
Protects against damage from impact & abrasion thru fabrication, shipping & installation
Coated optical glass
High gloss plastics

ADHESIVE TAPE MARKETS SERVED

Metal
Plastic
Industrial

ADHESIVE TAPE COLORS

Blue
Clear
White

GENERAL INFORMATION

3633 is a 3 mil, polyolefin film with acrylic adhesive. It is engineered for the general protection of stainless and aluminum surfaces. It can also be used with polyester and smooth polycarbonate.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyolefin
Adhesive (unwind)	Acrylic
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Activation	Pressure
Tensile Strength	8.40 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.