P2411 - Flame Retardant Acetate Cloth Electrical Tape

Permacel

E-Mail this datasheet

FEATURES

Provides snug wraps over irregular surfaces
Outstanding conformability allows for insulating & bundling over small diameters
Attractive appearance
Dielectric strength = 2,000 volts
Flammability rating = passes UL 510 test

ADVANTAGES

APPLICATIONS

Interwinding barrier insulation
Insulating connections & anchoring leads
Outer protective insulating wrap
Lead wire spot bundling
Bundle end turns
Insulate magnet wire-lead wire connections
Anchor leads to end turns
Hold winding starts
Tape breakouts
Tab down non-adhesive insulation & anchor leads

MARKETS SERVED

P2411 is an 8 mil, flame retardant, acetate cloth, electrical insulating tape. It is engineered specifically for all fine and ultra-fine wire applications.

COLORS

White

GENERAL INFORMATION

P2411 is an 8 mil, flame retardant, acetate cloth, electrical insulating tape. It is engineered specifically for all fine and ultra-fine wire applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Acetate
Adhesive (unwind)	Rubber (thermosetting)
Thickness (total)		8.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	45.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	45.00 lbs/in
Elongation Percent	10.00%

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Flame Resistant	Yes
Insulation Class	95.00°C

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.