P216 - Vinyl-Coated Cotton Cloth Electrical Insulating

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 60.00 yards
Heavy thickness results in minimum tape usage & minimum labor-per-unit costs
Outstanding conformability & flexibility, coupled with very high adhesion, make for snug wraps over irregular surfaces
Hand tearable
Tough vinyl & cloth backing offer puncture resistance & protection against chaffing
Dielectric strength = 2,200 volts

ADHESIVE TAPE ADVANTAGES

Waterproof construction , along with attractive appearance, make it ideal for outer wraps on coils which are not varnish impregnated or resin encapsulated

ADHESIVE TAPE APPLICATIONS

Lead & terminal board insulating pads & as lead anchor
Snug wraps over irregular surfaces provides maximum protection
Outer protective wrap in bobbin wound coils
Protective insulating wrap on degaussing coils for color television
Hook-up wire harness armor wrap in major appliances to provide abrasion/chaffing protection

ADHESIVE TAPE MARKETS SERVED

Appliances
Automotive
Electrical
Electronics
Transformers
Motors
Industrial

ADHESIVE TAPE COLORS

Black

GENERAL INFORMATION

P216 is a 15 mil, vinyl-coated, cotton cloth, electrical insulating tape. It is uniquely suited for shaded pole appliance motor coil outer protective wrap. P216 is an economical tape.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Vinyl Coated Cloth
Adhesive (unwind)	Rubber (synthetic)
Thickness (total)		15.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	35.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	65.00 lbs/in
Elongation Percent	8.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	105.00°C

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.