P201 - Cotton Cloth Electrical Insulating Tape

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 60.00 yards
Combination of toughness & conformability which permits snug wraps over irregular surfaces
Hand tearable
Effectively combines superior adhesion, high strength & low elongation
Good bulk provides excellent puncture & abrasion protection before & after varnishing
Dielectric strength = 2,500 volts
UL component recog.

ADHESIVE TAPE ADVANTAGES

High absorbancy properties promote excellent build & bond of varnishes & resins

ADHESIVE TAPE APPLICATIONS

Insulating lead connections, lead anchoring & protective insulating wrap on solenoid coils for appliances
Banding heavy magnet wire D.C. motor field coils
Insulating lead connections between layers of outer protective coil wrap for shaded pole motors

ADHESIVE TAPE MARKETS SERVED

Appliances
Automotive
Electrical
Electronics
Transformers
Motors
Industrial

ADHESIVE TAPE COLORS

White

GENERAL INFORMATION

P201 is a 10.5 mil, cotton cloth, electrical insulating tape. It is an ideal construction tape for individually wound transformer, reactor and choke coil using medium-gauge magnet wire. P201 is a popular tape used for coil end turn bundling, lead connection insulation and lead anchoring for small universal type appliance and automotive D.C. accessory motors.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Uncoated Cloth
Adhesive (unwind)	Rubber (thermosetting)
Thickness (total)		10.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	50.00 lbs/in
Elongation Percent	5.00%

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	105.00°C

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.