P213 - Glass Cloth Electrical Insulating Tape

Permacel

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Excellent conformability
High adhesion & strength with excellent abrasion/puncture resistance
Outstanding edge tear resistance
UL component recog.
Exceptional stability & retention of properties at Class 155° C

ADVANTAGES

Minimal out-gassing under high vacuum conditions after thermosetting which makes it ideal for use in outer space
Excellent Freon resistance after thermosetting

APPLICATIONS

Insulating lead wire to magnet wire connections
Lead wire anchoring & coil outer protective wraps for high temperature, air cooled & oil-immersed solenoid coils
In hermetic installations & transformer coils in Class 130° C & 155° C applications as insulating lead connections, lead pads & as protective outer wraps for solenoid coils
Slot cell edge tapping
Making motor lead & internal connections
Cable harness wrapping
Outer space applications

MARKETS SERVED

Automotive
Electrical
Electronics
Transformers
Motors
Industrial
Aerospace

COLORS

White

GENERAL INFORMATION

P213 is an 8 mil, glass cloth, electrical insulating tape. It is especially effective where solvent resistance is vital - before or after thermosetting.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Fiberglass
Adhesive (unwind)	Acrylic (thermosetting)
Thickness (total)		8.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	35.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	180.00 lbs/in
Elongation Percent	6.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	155.00°C
Dielectric Strength	2000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.