P212HD - Glass Cloth Heavy-Duty Electrical Insulating Tape

Permacel

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Edge tear resistance & puncture/abrasion resistant
Flammability rating = passes UL 510 flame test
UL component recog.

ADVANTAGES

High thermal rating, flame retardancy & superior conformability

APPLICATIONS

Coil armor wrap
Barrier or ground insulation on toroidal coils
High temperature harness wrapping
Television component coils as a high temperature & flame retardant tape
High voltage insulating protective wrap
Bundling/banding heavy conductor coils
General purpose insulating & holding applications involving heavy-gauge wire &/or temperatures
Terminal board pads
Holding coil leads & anchoring terminal boards
Sealing & enclosing hermectically-packaged components
Making motor lead & internal connections, slot cell edge taping & cable harness wrapping
Plasma spray operations

MARKETS SERVED

Automotive
Electrical
Electronics
Transformers
Motors
Industrial
Television

COLORS

White

GENERAL INFORMATION

P212HD is a 10 mil, glass cloth, electrical insulating tape. It is used wherever superior solvent resistance and flame retardancy are key requirements. P212HD is recommended for general-purpose insulating and holding applications involving heavy-gauge wire and/or temperatures. It is used as cargo pit tapes and is especially effective on new liner surfaces with low surface energies.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Fiberglass
Adhesive (unwind)	Silicone
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	180.00 lbs/in
Elongation Percent	7.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Flame Resistant	Yes
Insulation Class	180.00°C
Dielectric Strength	5500.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.