354 - Epoxy Reinforced Insulating Tape

Permacel

E-Mail this datasheet

FEATURES

Tear & puncture resistance
Superior dispensability by hand or machine
Thermosetting acrylic adhesive offers high initial tack & is solvent resistant
Unwind @ 150 FPM = 30 oz./in.
Flammability rating = passes UL 510 flame test

ADVANTAGES

High purity which is ideal for corrosion-sensitive applications
Superior dielectric strength

APPLICATIONS

Interwinding barrier & outer insulation wrap on pulse transformer & choke coils where flame retardancy is vital
Terminal board pads & protective outer wraps on shade pole motors
Cross-over & barrier insulation
Construction tape for wide range of holding functions

MARKETS SERVED

Transformers
Motors
Industrial

COLORS

White

GENERAL INFORMATION

354 is a 6 mil, epoxy reinforced, insulating tape. It is specifically designed for producers of bobbin and stick wound coils and fractional horsepower motors who require optimal electrical properties as well as performance dependability.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Reinforced Epoxy
Adhesive (unwind)	Acrylic (thermosetting)
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	40.00 lbs/in
Elongation Percent	20.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	130.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	9000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.