354E - Epoxy Reinforced Insulating Tape

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Outstanding puncture, tear & abrasion resistant
Offers the necessary insulation build with a minimum number of wraps
Special backsizing allows direct printability
UL component recognized
Passes UL 510 flammability test
Unwind @ 150 FPM = 30 oz./in.

ADHESIVE TAPE ADVANTAGES

Provides excellent dielectric strength with non-corrosivity

ADHESIVE TAPE APPLICATIONS

Identification & insulating outer protective wraps for transformer & relay coils also requiring flame retardancy
Usable for terminal board pads & protective outer wraps on shaded pole motors
Barrier insulations & outer wraps over fine wire
Outer wrap for transformer coils
Bundling end turns
Insulating connections
Phase & wind separator insulation in sub-fractional & fractional horsepower motor windings
Construction tape for wide range of holding applications

ADHESIVE TAPE MARKETS SERVED

Transformers
Motors
Industrial

ADHESIVE TAPE COLORS

White

GENERAL INFORMATION

354E is a 6.2 mil, epoxy reinforced, insulating tape. It is engineered for use by manufactures of bobbin, stick and form wound coils. 354E is directly printable and flame retardant which makes it an ideal outer wrap for transformer coils.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Reinforced Epoxy
Adhesive (unwind)	Rubber (thermosetting)
Thickness (total)		6.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	40.00 lbs/in
Elongation Percent	20.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Flame Resistant	Yes
Insulation Class	130.00°C
Direct Electrolytic Corrosion Factor	1.00 Factor
Dielectric Strength	8500.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.