3161-2 MIL - 2 Mil Flame Retardant Printable Polyester Film

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 72.00 yards
High tensile strength promotes good, tight coils while combatting dispenser breaks
Solvent resistancy requires no flagging, or pre-bake cycles
Tear resistant, thin & highly conformable
Flammability rating = passes UL 510 Test

ADHESIVE TAPE ADVANTAGES

Perfectly suited for long service life applications in telecommunications, computer & data processing components
Excellent high temperature & high humidity aging properties

ADHESIVE TAPE APPLICATIONS

Ultimate tape for film-foil & film wrap capacitor applications
Interwinding barrier insulation & outer insulation wrap on pulse transformer & choke coils where flame retardancy is vital
Lead connecting insulating pad
Lead & terminal board anchor on large bobbin & stick wound coils
Bundling magnet wire, for tactile touch & membrane switches & in keyboards

ADHESIVE TAPE MARKETS SERVED

Computer
Teleccommunications
Electrical
Electronics
Industrial
Printed circuit boards
Membrane switches

ADHESIVE TAPE COLORS

White
Yellow

GENERAL INFORMATION

3161-2, is a 3.5 mil, flame retardant, printable, polyester film tape. It is ideal for film-foil and film wrap capacitors because they effectively combine direct printability, flame retardancy and a high degree of conformability. 3161-2 Mil has excellent electrical properties and mechanical strength which makes it outstanding where minimum insulation build-up requirements prevail.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	2.00
Adhesive (unwind)	Acrylic (thermosetting)	1.50
Thickness (total)		3.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	50.00 lbs/in
Elongation Percent	110.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Flame Resistant	Yes
Insulation Class	130.00°C
Dielectric Strength	7000.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.