P430 - 2-Mil PTFE Film Tape

Permacel

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Chemically inert
Even, smooth roll unwind
Superior adhesion
Solvent & fuel resistant
Strips cleanly and easily

ADVANTAGES

Used as a high temperature release surface on heat sealer bars & rollers
Anti-friction masking, flashing, release and separator applications

APPLICATIONS

Low coefficient of friction is ideal for lining conveyor guides or wrapping rails
Flashing tape applications
Liner for chutes & rails
High-temperature release film on heat sealers & bars

MARKETS SERVED

Commercial printing
Metals
Plastics
Equipment & machinery
Industrial
Painting
Coatings
Aerospace

COLORS

GENERAL INFORMATION

P430 is a 3.5 mil, PTFE film tape. It is engineered primarily for anti-friction masking, flashing, release and separator applications where a clean, slick surface is required to speed up the movement of materials or reduce equimpent wear. P430 is ideal as a liner for chutes and rails, as flashing tape, as a separator tape to prevent electrolytic corrosion of dissimilar metals, or as a high temperature release film.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Hi Modulous
Adhesive (unwind)	Acrylic	1.50
Thickness (total)		3.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	28.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	155.00°C
Dielectric Strength	10000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.