587A - Stickyback Foam Mounting Tapes

Permacel

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Adhesion to rubber = 30 oz/in on both sides
Suitable for rubber or photopolymer printing plates
Repositionable
Residue free removal

ADVANTAGES

Specially formulated adhesive assures firm bond between cylinder & printing plates
High cohesive-strength adhesive & firm anchorage to tape's foam carrier allows easy repositioning of plates & clean removal
Consistent thickness makes certain that the plate is at the correct distance from the printing surface throughout the entire print run

APPLICATIONS

Rubber printing plate mounting
Photopolymer printing plate mounting

MARKETS SERVED

Commercial printing

COLORS

White

GENERAL INFORMATION

587A is a 15 mil, PVC foam, flexographic printing plate mount. It is a dependable mount for both rubber & photopolymer printing plates. 587A provides quick repositioning and residue free removal once the print run is completed.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride
Adhesive (unwind)	Rubber
Adhesive (liner)	Rubber
Thickness (total)		15.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	46.00 oz/in	46.00 oz/in
Adhesive Removable	Yes	Yes
Adhesive Clean Removable	Yes	Yes
Adhesive Repositionable	Yes	Yes
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.