FEATURES
- Conforms well to gaps with rough surfaces as well as to expansion and contraction caused by temperature change
- When heated or compressed, the foam will not permit any component to be squeezed out
- Lightweight (specific gravity is 0.095), and the foamed admixtures do not weld each other
- Compression load at 25%=5oz/sq in; at 50%=11 oz/sq in
- Available with polypropylene liner as EE1010PL
ADVANTAGES
- Offers excellent weatherability (ten years equivalent test), high resistance to low and high temperatures
- High chemical resistance (acids and alkalis)
- Resists low compression stress - will never deform a structure after application
- Easy to compress
- Excellent water tightness can be obtained
- Easy to store and apply
APPLICATIONS
- Can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material
- Building and civil engineering works: For sealing joints of exterior panels such as PC plates, ALC plates or slate plates
- For sealing joints around sashes and of steel water grooves, and at road or bridge construction sites
- Electrical appliances: For packing and sealing refrigerators, washers, air conditioners, etc.
- Housing and equipment : For packing and sealing
- Marine vessels, rolling stock, autos: Used for sealing weathership retainers and for filling and sealing all types of joints
MARKETS SERVED
- Marine
- Automotive
- ElectricalConstruction
- Appliances
COLORS
|
 |
GENERAL INFORMATION
| EE1010 (EPT Sealer) is a pressure-closed-cell foam joint-filling material used to fill gaps found in a variety of structures i.e. buildings, civil engineering works, rolling stock, housing facilities and all types of equipment. It is manufactured by expanding a mixture of synthetic rubber and EPDM (ethylene propylene diene methylene). According to the degree of compression applied to the foam, EE-1010 can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material.
Building and civil engineering works: For sealing joints of exterior panels such as PC plates, ALC plates or slate plates. For sealing joints around sashes and of steel water grooves, and at road or bridge construction sites. Electrical appliances: For packing and sealing refrigerators, washers, air conditioners, etc. Housing and equipment : For packing and sealing. Marine vessels, rolling stock, autos: Used for sealing weathership retainers and for filling and sealing all types of joints. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
EPDM - Ethylene Propylene Diene Monomer |
|
| Foam Cell Type |
Closed |
|
| Thickness (total) |
|
Unknown |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
52.80 oz/in |
|
|
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
13.00 lbs/in |
|
|
| Elongation Percent |
430.00% |
|
|
Testing Info: JIS K 6767 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
| Water Resistant |
Yes |
| UV Resistant |
Yes |
| Chemical Resistant |
Yes |
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
40°F |
| Minimum Service Temperature |
0°F |
| Maximum Short-Term Temperature |
212°F |
|
|
|